SG4000Netz sampler, mains operation

Item number: 00140

The air sampler SG4000Netz has been developed for the steady state sampling of gaseous and particulate matter.

Category: SG4000Netz


1.565,00 €

Excluding 19% VAT., plus shipping (Versicherter Versand)

Delivery status: Upon request



Description

The air sampler SG4000Netz has been developed for the steady state sampling of gaseous and particulate matter.

The range of nominal flow rate is from 50 to 3,500 ml/min, lower flow rates down to approx. 10 ml/min are possible with higher tolerance, higher flow rates up to approx. 4,000 ml/min are also possible with shorter run times and less flow resistance/back pressure, without charger.

It is not allowed to use the air sampler SG4000Netz in explosive atmospheres and can only be used with the power supply SG4000Netz!
The sampler is equipped with a powerful rotary vane pump, which generates a nearly pulsation-free vacuum and can overcome high flow resistances. The sampler is easy to operate and covers a wide adjustable flow range from approx. 20 to 4,000 ml/min without any gap. The requirements on a constant volume flow with changing flow resistance with fault indication and automatic shut-off are fulfilled through the automatic volume flow regulation over the complete range.

Specifications:
- Nominal flow rate: 50-3,500 ml/min (± 5 %)
- Adjustable flow rate: approx. 10-4,000 ml/min
- Electronic flow regulation 
- Sampling time programmable, automatic switching-off, battery-buffered data storage
- Display shows actual capacity of the battery, running time of errors
- Easy way of using the keys
- Electronical way of Locking the keys
- Shows percentage burden of the pump
- Dimensions (WxDxH): 102x112x44 mm
- Weight: 800 g

Construction and Operation:
The air sampler SG4000Netz is equipped with a rotary vane pump, which is controlled and regulated by an integrated microprocessor according to the actual power demand. The automatic flow control and regulation keeps the flow rate within the nominal range constant within ±5% of the initial set point during the sampling time.
The sampler switches off automatically when reaching the preset sampling time or, after a certain time of fault indication on the display, when the adjusted flow rate can-not kept constant inside the required tolerance range because of too high flow resistance from the filter load. The run time is stored and the reason for the switching-off is indicated on the display. The sampling time is programmable and the actual run time as well as possible fault messages are shown on an eight-digit LCD display.

Scope of supply:
- Sampler SG4000Netz
- Power supply SG4000Netz
- Adjusting screw key
- Silicone tube
- Operating instructions (D/E)

Available accessories:
- Transport cases
- Different collection heads for hazardous substances with adapter

Of course you will find further equipment at our online store. If you have any questions, please use our contact form or just call us.

Shipping information:
- No marking necessary

Product weight: 0,80 Kg

Question on item

Question on item